After a long day on the mountain, the last thing you want to think of is looking after your snowboard boots. However, without correct cleaning and drying, your snowboard boots won’t last much longer.
Snowboard boots liners can be hand washed in warm water and a gentle detergent to remove the smell and bacteria that has built up from use.
Following a few simple steps, your boots will be as good as new and ready for your next powder run.
Can I machine wash snowboard boot liners?
Snowboard boots liners are made from a mixture of foam and fleece lining that is held together by glue and stitching to form your snowboard boots.
Putting a snowboard boot liner in the washing machine can damage the structure of the foam and separate the glue that holds the boot together.
Using methods such as hand washing and preventative odor sprays will give you a clean boot without causing any damage.
See also: How long do snowboard boots last?
How do you dry the inside of snowboard boots?
After snowboarding for a full day, your feet naturally produce sweat in your boots. This sweat turns into bacteria in your snowboard boots and needs to be dried out and cleaned to avoid odor.
To dry your snowboard boot liners, you need to use a form of heat assistance to aid the drying process.
Following these simple steps will have your boots dry fast enough:
- Take off your boots and remove your liner from the inside of your snowboard boot.
- Once the shell of your boot and the liner are separate, place your liners on a heat-assisted boot dryer.
- If you don’t have a boot dryer, place newspaper inside your boot to remove excess moisture. Place them near a heat source.
- When your liners are dry, place them back inside your snowboard boot shell.
Doing this process each day will minimize the build-up of bacteria and odor, giving you decent smelling boots that are ready for your next run on the mountain.
Can you put snowboard boot liners in the dryer?
Snowboard boots are designed to be heat molded, but when heated up for long periods of time the boot can get deformed and not return to its original shape.
Using a dryer will permanently damage your snowboard boot liners as the heat is too high for the liner to withstand. This will then change the shape of your boot by damaging the glue that holds the liner together.
How do you clean a snowboard liner?
To get the best ride out of your snowboard boots, they should be cleaned at least once per season or after every ski holiday. This will ensure they don’t keep any nasty smells.
Cleaning your snowboard liner must be done by hand, with warm water and a mild detergent. After they have been washed they must be dried correctly to prevent damage to the interior of the liner.
To do this, follow these simple steps:
- Start by removing your liner from your boot.
- Using warm water, add a small amount of mild detergent or antibacterial soap.
- Place the liners into the soapy water and use your hands to clean the inside and exterior of the liner.
- Rinse off the boots in clean cold water.
- Once the liners are clean, allow them to dry overnight.
How do I clean my Intuition liner?
Intuition liners use advanced technology in their closed foam, allowing for the liners to be molded precisely to your feet.
The cleaning process is very similar to the steps in the preceding. However, Intuition liners should be rinsed in cold water as opposed to warm water to keep their custom shape.
Whether you’re using regular or Intuition liners, your boots must be completely dry before use or storage.
How do you get the smell out of boot liners?
Smelly boots aren’t good for your feet, boots, or friends!
There are three main ways to get the smell out of your boots:
- Dry them correctly
- Hand wash them thoroughly
- Use products to remove the bad smell.
Using odor repelling sprays will kill the bacteria in your boots that cause the smell and prevent the smell from returning.
Another way of reducing the smell is using baking soda in your boots. It neutralizes the smell, and costs very little.
Simply pour in a small amount of baking soda into your boots, let it sit overnight, then vacuum out the following day.
Why do my boots smell like cat pee?
Got some funky smells coming from your boots? It could be down to excess exposure to water and incorrect drying of your liner.
The smell often described as ‘cat pee’ is often due to the polyurethane component in the sole breaking down or rotting, therefore releasing ammonia giving it the ‘cat pee smell’.
Drying your boot liner after every session on the mountain will reduce “cat pee” smell and make your boots last longer.
How do I keep my snowboard boots from smelling?
To keep your snowboard boots from smelling can be a time consuming task, however, with a few preventive steps, you can speed up the process and have more time to ride:
• Using fresh socks each day will reduce the smell in your boots.
• Drying your boots completely after riding reduces the moisture in the boot which prevents unwanted smells.
• Using odor repellent sprays specifically designed to reduce smells and bacteria will clear any existing smells and prevent future bacteria build up.
How do you remove a snowboard boot liner?
Getting your liners out of your boots can be tricky if they are still new and stiff. However with the right technique, it takes just a few moments.
Here’s how to remove your snowboard liners:
- Undo all lacing and boa’s fully.
- Grab the back of the snowboard boot liner and pull it away from the base of the boot and down towards the outside of your boot.
- You will feel the liner separate from the boot.
You may feel a little resistance from the snowboard liner if your lacing or boa’s aren’t loose enough, double check they are apart to ensure their is enough room to replace the liner.
If you boot is still resistant, try first putting the boot for a little while to gently warm it up, this will make the liner softer and easier to remove.
Are snowboard boots supposed to hurt?
Can You Stretch Tight Snowboard Boots?
How do you put the liner back on a snowboard boot?
Here’s is how to easily put your liner back in your snowboard boot:
- Open the shell of your boot fully, pulling the tongue towards the toe of the boot.
- Ensure all inner lacing is released fully so the liner has enough room to go back in.
- Place your hand inside your liner for support, guide the toe of your line into the boot, push down firmly.
If you’re struggling to replace the liner, try pulling the tongue away from your boot to make more room.
You can also try lightly warming your boots with a heat source to make your boot shells more pliable.
Can ski boot liners be washed?
Ski boots are made of a stiffer, rigid foam very different than the foam of a snowboard boot which is generally softer and more flexible.
Ski boot liners should not be put in the washing machine. This is because the excess water can cause the delamination of the foam in your liner, making them unwearable.
To wash your ski boots liner, remove them from the ski boot shell. Using warm water and antibacterial soap, clean the liners by hand.
Once clean, rinse in warm water and leave to dry by a heat source. This will leave your boots bacteria free and smelling clean.
How do you clean ski boot shells?
The outside shell of your ski boot also needs some TLC from time to time. They can have a build up of oils and dirt from man made snow that can cause damage to the shell over time.
To clean the outside of your ski boots, follow these simple steps:
1. First, remove your ski liners from the shell of your ski boot and set them aside.
2. Using a warm cloth, apply a little mild dish soap to your cloth and wipe around the whole boot including the soles.
3. Next, rinse your cloth and repeat the process with clean water to remove any soap.
4. Allow them to dry, keeping them away from direct heat. Once dry, replace your liners inside your boots.
If you’re dealing with tough stains, leave the dish soap on for a few extra minutes to remove the stains. You may notice some marks wont remove, these may have built up over time. Regular cleaning will prevent new stains from appearing.
How do you get mold off snowboard boots?
Mold can build up in your snowboard boots over time if they are stored in a damp place.
To get mold off your snowboard boots, mix a solution of part white vinegar and part water, then apply this to the affected areas. This will break down the bacteria and remove the mold.
Repeat this process until all the mold is gone, then wash your boots by hand with soap to ensure the vinegar solution is gone, and allow them to dry.
How do you air out snowboard boots?
To prevent mold forming on your boots in the first place, airing out your boots after use will keep the bacteria causing the mold to grow from building up.
Airing out your boots allows for excess moisture to dry up, this can be done by removing the liners from the boot and leaving them in a dry, damp free area.
See also: Can You Snowboard With Regular Boots?